OSHA 30 Online
general industry | construction industry
osha outreach training in english and spanish!
The programs are broken down into two vertical standards, Construction and General Industry. Online Outreach Training Providers must receive acceptance of their Training Programs from the OSHA Outreach Training Program prior to making them available to their students. osha-30-online.com has received acceptance of their programs through their parent company 360training.com.
OSHA 30 Hour Construction Industry
The OSHA 30 Hour Construction Industry Outreach Training course is a comprehensive safety program designed for anyone involved in the construction industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Construction workers must receive additional training, when required by OSHA standards, on specific hazards of the job.
Learning Outcomes:
- Locate OSHA Standards references applicable to specific hazardous conditions and practices (Introduction to OSHA Standards)
- Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions)
- Implement preventative measures for accidents in their workplace (Subpart D- Occupational health and Environmental Controls)
- Describe types of personal protective equipment (PPE), and the requirements for use in OSHA standards (Subpart E- Personal Protective Equipment)
- Understand the requirements for fire protection in the workplace (Subpart F- Fire Protection and Prevention)
- Identify types of rigging equipment used to protect employees (Subpart H- Rigging; Subpart N- Cranes and Rigging)
- Identify the critical health and safety hazards of welding and cutting in the construction industry (Subpart J- Welding and Cutting)
- Identify common electrical hazards and related OSHA standards (Subpart K- Electrical Standards)
- Understand the importance of scaffolding for workers in elevated workplaces (Subpart L- Scaffolding)
- Implement measures for protecting workers and equipment from dangerous falls (Subpart M- Fall Protection)
- Recognize the hazards associated with working in or around excavation sites (Subpart P- Excavations)
- Understand the safety requirements necessary to protect workers around concrete and masonry jobs (Subpart Q- Concrete and Masonry)
- Identify the precautions and hazards to protect workers using explosives or blasting agents (Subpart T- Demolition)
- Protect workers who perform jobs on or around stairways or ladders at worksites (Subpart X - Stairways and Ladders)
- List and describe the hazards and prevalence of confined spaces
Course Pre-Requisite: None
Testing: All module quizzes require a score of 70 to proceed forward in the course. The final exam also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken three times if necessary.
NEW! OSHA 30-Hour Construction Outreach Study Guide! This new 190 page Study Guide will ensure you are ready to take the final exam to receive your OSHA DOL Card. The Study Guide will assist you throughout the online course and can also be used as a future reference manual
Time to completion: Once you enroll in the online OSHA 30 Hour Construction Outreach Training course you will have 6 months to successfully complete the course. If you do not complete the course in 6 months you will not receive a certificate for course completion.
Need a Certificate Now? A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will also receive an OSHA 30-Hour Construction Outreach DOL course completion card within 4-6 weeks. Laminated cards now available!
In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course.
The OSHA Thirty Hour Construction Outreach Training course has been reviewed and accepted by OSHA for online distribution.
Pre-requisite: The OSHA 30 Hour Construction Industry Outreach Training course does not have any pre-requisites; however, the OSHA 30 Hour Construction Industry Outreach training course or an equivalent of 30 hours of prior safety and health training plus 5 years of construction safety and health experience is a prerequisite for the OSHA 500 Trainer course.
Enroll NowOsha 10 Hour General Industry
The OSHA 30 Hour General Industry Outreach Training course is a comprehensive safety program designed for anyone involved in general industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1910. General industry workers must receive additional training, when required by OSHA standards, on specific hazards of the job.
Learning Outcomes:
- State the purpose of the OSH Act and list the functions of OSHA
- List the OSHA inspection priorities and describe the inspection process
- Describe the rights and responsibilities of employers and employees under the OSH Act
- The basic requirements for proper aisle and passageway maintenance
- Guidelines for identification and protection of floor openings
- To understand the importance of effective Egress fire protection program
- To know the safe means of Egress to provide fire protection in emergencies from new or old buildings or structures
- Outline the general requirements for general safety standards
- Establish the guidelines and requirements for special purpose equipment
Course Pre-Requisite: None
Testing: All module quizzes require a score of 70 to proceed forward in the course. The final exam also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken three times if necessary.
Time to completion: Once you enroll in the OSHA 30 Hour General Industry Outreach Training course you will have 6 months to successfully complete the course. If you do not complete the course in 6 months you will not receive a certificate for course completion.
Need a Certificate Now? A temporary printable certificate will be made available immediately upon successful completion of course. Passing participants will also receive an OSHA 30-Hour General Industry Outreach DOL course completion card within 4-6 weeks. Laminated cards now available!
In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course.
The OSHA Thirty Hour General Industry Outreach Training course has been reviewed and accepted by OSHA for online distribution.
Pre-requisite: The OSHA 30 Hour General Industry Outreach Training course does not have any pre-requisites; however, the OSHA 30 Hour General Industry Outreach training course or an equivalent of 30 hours of prior safety and health training plus 5 years of general industry safety and health experience is a prerequisite for the OSHA 501 Trainer course<
ABIH Approval#: 08-371
Enroll NowThank you for checking us out!
site info
© 2009 OSHA Training by Easy Safety School | View our sitemap